Overview of the Application of Computer-Aided Tools in Information Systems Development
DOI:
https://doi.org/10.25007/ajnu.v12n3a1517الملخص
Developing Information Systems (IS) using computer-aided tools (CATs) yields immense benefits realized by following a set of activities and techniques. Apart from revolutionizing IS development, another key benefit of computer-aided approach remains the improvement of the overall IS development process. While integrated CATs could be used throughout the phases of IS development life-cycle, others are only meant serve specific phases. The present paper provides a short review on the concepts in IS Development using CATs. Furthermore, the paper highlights the most prominent CATs that are widely used and how these tools fit into different phases of IS development. It also describes how using CATs paved the way to the recent trends in user-centred and end-user IS development approaches.
التنزيلات
المراجع
R. M. Stair and G. W. Reynolds, Information systems essentials, 5th ed. Australia: Course Technology Cengage Learning, 2012.
P. Isaias and T. Issa, “Information System Development Life Cycle Models,” in High level models and methodologies for information systems, New York: Springer Science + Business Media, 2015, pp. 21–40.
N. Ahituv, S. Neumann, and M. Zviran, “A system development methodology for ERP systems,” J. Comput. Inf. Syst., vol. 42, no. 3, pp. 56–67, 2002.
P. . Loucopoulos and V. Karakostas, “C.A.S.E. Technology Introduction,” in System Requirements Engineering, New York, NY, USA: McGraw-Hill, Inc., 1995, pp. 208–232.
V. Berdonosov and E. Redkolis, “TRIZ-fractality of computer-aided software engineering systems,” Procedia Eng., vol. 9, pp. 199–213, 2011.
A. A. Lawan, A. S. Abdi, A. A. Abuhassan, and M. S. Khalid, “What is Difficult in Learning Programming Language Based on Problem-Solving Skills?,” in 2019 International Conference on Advanced Science and Engineering, ICOASE 2019, 2019.
A. Zakari, A. A. Lawan, and G. Bekaroo, “A Hybrid Three-Phased Approach in Requirement Elicitation,” in Lecture Notes in Electrical Engineering, vol. 416, 2017, pp. 331–340.
H. Lieberman, F. Paternò, M. Klann, and V. Wulf, “End-User Development: An Emerging Paradigm,” in End User Development, Dordrecht: Springer Netherlands, 2006, pp. 1–8.
D. Aveson and G. Fitzgerald, “Methodologies for Developing Information Systems: A Historical Perspective,” in The Past and Future of Information Systems: 1976–2006 and Beyond, Springer., vol. 214, J. . Avison, D.; Elliot, S.; Krogstie, J.; Pries-Heje, Ed. Boston: International Federation for Information Processing, 2006, pp. 27–38.
S. Balaji and M. M.Sundararajan, “Waterfall Vs V-Model Vs Agile : A Comparative Study on SDLC,” Int. J. Inf. Technol. Bus. Manag., vol. 2, no. 1, pp. 26–30, 2012.
I. Sommerville, Software Engineering, 9th ed. United States of America: Pearson Education, Inc, 2011.
M. Boahene and S. Bowles, “Information systems development methodologies: Are you being served,” Proc. 10th Australas. Conf. Inf. Syst., pp. 88–99, 1999.
S. B. Denerel and T. Birişçi, “Drawing Tools Used from Past to Present in the Architectural Design Process#,” J. Int. Environ. Appl. Sci., vol. 12, no. 3, pp. 230–237, 2017.
S. Cronholm, “Why CASE Tools in Information Systems Development?-an empirical study concerning motives for investing in CASE tools,” Proc. 18th Inf. Syst. Res. Semin. Scand. IRIS, vol. 18, pp. 132–144, 1995.
D. Jankowski, “Computer-aided systems engineering methodology support and its effect on the output of structured analysis,” Empir. Softw. Eng., vol. 38, pp. 11–38, 1997.
R. Sudarsan, S. J. . Fenves, R. D. . Sriram, and F. Wang, “A product information modeling framework for product lifecycle management,” CAD Comput. Aided Des., vol. 37, no. 13, pp. 1399–1411, 2005.
E. P. E. Turban, R. K. Rainer, and Richard, “Information System Development,” in Introduction to Information Technology, 1st ed., Wiley, 2000, p. 461.
A. Demirci, “Student Views on the Use of Computer Aided Graphic Design Courses Abstract,” e-Journal New World Sci. Acad., vol. 6, no. 4, pp. 472–484, 2011.
A. Ozkan and K. Yıldırım, “Comparison of Conventional and Computer-aided Drafting Methods from the View of Time and Drafting Quality,” Eurasian J. Educ. Res., no. 62, pp. 239–254, 2016.
A. Forward and T. C. Lethbridge, “The relevance of software documentation, tools and technologies,” in Proceedings of the 2002 ACM symposium on Document engineering - DocEng ’02, 2002, p. 26.
P. Vik, D. Luís, P. Guilherme, and J. Oliveira, “Layout and process optimisation: using computer-aided design (CAD) and simulation through an integrated systems design tool,” Int. J. Simul. Process Model., vol. 9, no. 1/2, p. 46, 2014.
التنزيلات
منشور
كيفية الاقتباس
إصدار
القسم
الرخصة
الحقوق الفكرية (c) 2023 المجلة الأكاديمية لجامعة نوروز
![Creative Commons License](http://i.creativecommons.org/l/by-nc-nd/4.0/88x31.png)
هذا العمل مرخص بموجب Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
بيان الحقوق الفكرية
حقوق التأليف
يوافق المؤلفون الذين ينشرون في هذه المجلة على المصطلحات التالية:
١. يحتفظ المؤلفون بحقوق الطبع والنشر ومنح حق المجلة في النشر الأول مع العمل المرخص له في نفس الوقت بموجب ترخيص المشاع الإبداعي [سيسي بي-نك-ند 4.0] الذي يسمح للآخرين بمشاركة العمل مع الإقرار بحقوق التأليف والنشر الأولي في هذه المجلة.
٢. يمكن للمؤلفين الدخول في ترتيبات تعاقدية إضافية منفصلة للتوزيع غير الحصري للنسخة المنشورة من المجلة من العمل (على سبيل المثال، نشرها في مستودع مؤسسي أو نشرها في كتاب) مع الإقرار بنسخة أولية نشر في هذه المجلة.
٣. يسمح للمؤلفين وتشجيعهم على نشر عملهم عبر الإنترنت (على سبيل المثال، في المستودعات المؤسسية أو على موقعهم على الويب) قبل وأثناء عملية التقديم، حيث يمكن أن يؤدي إلى التبادلات الإنتاجية، فضلا عن الاستشهاد المبكر والأكبر للعمل المنشورة ( انظر تأثير النفاذ المفتوح).
نقل حقوق الطبع والنشر
بيان الخصوصية
المجلة الأكاديمية لجامعة نوروز ملتزمة بحماية خصوصية مستخدمي موقع المجلة هذا. سيتم استخدام الأسماء والتفاصيل الشخصية وعناوين البريد الإلكتروني التي تم إدخالها في هذا الموقع الإلكتروني فقط للأغراض المعلنة لهذه المجلة ولن يتم إتاحتها لأطراف ثالثة بدون إذن المستخدم أو الإجراءات القانونية الواجبة. موافقة المستخدمين مطلوبة لتلقي الاتصالات من المجلة الأكاديمية لجامعة نوروز للأغراض المعلنة للمجلة. ويمكن توجيه الاستفسارات المتعلقة بالخصوص إلى [email protected]