Estimating Max moment and shear exerted on contiguous piles subjected to earthquake using ANN.

المؤلفون

  • Mateen Ibrahim A. Barwari Department of Civil Engineering, Nawroz University, Duhok, KRG-Iraq.
  • Najdat S. Akrawi Department of Civil engineering, Collage of Engineering, University of Dohuk, Duhok, KRG-Iraq.

DOI:

https://doi.org/10.25007/ajnu.v13n1a1741

الملخص

Recently the usage of Contiguous piles in many different aspects of construction projects are become more common. Determination of the shear force and moment values exerted on the contiguous piles require extensive analysis and calculations especially when earthquake is to be encountered. ANN mathematical models for calculating this value combining 144 input sets that represent height of excavated (H), ratio of H to the depth of embedment (D), unit weight of retained soil ( ) and angle of internal friction ( ) is presented in this paper. The mathematical models obtained show acceptable regression and deviation. It was found that both shear and moment values subjected on the piles are decreases with the decrease of ( ) and increases with the increase of ( ). The height of excavation (H) was found as the most important input parameter that affects the output values of the models

التنزيلات

بيانات التنزيل غير متوفرة بعد.

المراجع

AASHTO 2ND, L. 1998. Bridge design specifications. American Association of State Highway and Transportation Officials, Washington, DC.

ALKROOSH, I. & NIKRAZ, H. 2012. Predicting axial capacity of driven piles in cohesive soils using intelligent computing. Engineering Applications of Artificial Intelligence, 25, 618-627.

CHAVDA, J. T., SOLANKI, C. H. & DESAI, A. K. 2019. Lateral Response of Contiguous Pile Wall Subjected to Staged Excavation: Physical and Numerical Investigations. Indian Geotechnical Journal, 49, 90-99.

CLAYTON, C. R., WOODS, R. I. & MILITITSKY, J. 2014. Earth pressure and earth-retaining structures, CRC press.

COULOMB, C. 1776. Essai Sur Une Application Des Maximis et Minimis a Queques problems Des Statique Relatifsa1‟ Architecture. Nem. Div. Sav. Acad, Sci, 7.

DESAI, C. & KUPPUSAMY, T. 1980. Application of a numerical procedure for laterally loaded structures. Numerical methods in offshore piling. Thomas Telford Publishing.

GARSON, D. G. 1991. Interpreting neural network connection weights.

GOH, A. 1995. Empirical design in geotechnics using neural networks. Geotechnique, 45, 709-714.

MONONOBE, N. On determination of earth pressure during earthquake. Proc. World Engineering Congress, 1929. 177-185.

MURTHY, V. 2002. Geotechnical engineering: principles and practices of soil mechanics and foundation engineering, CRC press.

OKABE, S. 1924. General theory on earth pressure and seismic stability of retaining wall and dam. Proc. Civil Engrg. Soc., Japan, 10, 1277-1323.

SAMARASINGHE, S. 2016. Neural networks for applied sciences and engineering: from fundamentals to complex pattern recognition, Auerbach publications.

UBC, U. B. 1997. UBC 97, Code for Seismic Design of Buildings (1997 Edition). Structural engineering design provisions, 2.

VANLUCHENE, R. & SUN, R. 1990. Neural networks in structural engineering. Computer‐Aided Civil and Infrastructure Engineering, 5, 207-215.

التنزيلات

منشور

2024-03-31

كيفية الاقتباس

Ibrahim A. Barwari, M. ., & S. Akrawi, N. . (2024). Estimating Max moment and shear exerted on contiguous piles subjected to earthquake using ANN. المجلة الأكاديمية لجامعة نوروز, 13(1), 742–753. https://doi.org/10.25007/ajnu.v13n1a1741

إصدار

القسم

مقالات