Design Chart of a footing located on a Crest of the Unsaturated Soil slopes
DOI:
https://doi.org/10.25007/ajnu.v8n4a463الكلمات المفتاحية:
Design Chart, footing, Unsaturated Soil, slopeالملخص
A parametric study points out the effect of various influential parameters on the stability of the unsaturated clayey and alluvial soil slopes using finite element computer programs of GEOSLOPE. The rainfall intensity and duration is considered as one of the studied parameters, three intensity values are selected (10, 24 and 50) mm/day (with different duration 10, 20, 30, 40, 50 and 60) day. Phreatic line level is the second parameter studied, at 2, 4, and 6m from surface. In addition to that, footing width is studied as the third parameter. Consequently, three different widths are selected (1, 2, and 3m). Slope angle is also selected as the fourth parameters; four different angles are selected (31, 45, 63 and 81) degree. As a result, a chart for routine design is obtained.
التنزيلات
المراجع
2. Briaud, J.L. and Gibbens, R. (1994), “Predicted and measured behavior of five large spread footings on sand”, in Proc. Prediction Symp. ASCE GSP41.
3. Chen, H., Lee, C.F., Law, K.T., 2004. Causative mechanism of rainfall-induced fill slope failures. Journal of Geotechnical and Geo-environmental Engineering, ASCE, 130, (6), 593–602.
4. Fredlund, D.G., Rahardjo, H., 1993. Soil Mechanics for Unsaturated Soils. ohn Wiley and Sons, Inc., USA
5. Kassim A, Gofar N, Lee M. L, Rahardjo H. (2012). Modeling of suction distributions in an unsaturated heterogeneous residual soil slope. Engineering Geology, 131–132: 70–82.
6. Lee M. L, Kassim A, Gofar N. 2011. Performances of two instrumented laboratory models for the study of rainfall infiltration into unsaturated soils. Engineering Geology, 117, 78–89.
7. Liu, G. R. and Quek, S. S., (2003), "The Finite Element Method", A Practical Course, Department of Mechanical Engineering, National University of Singapore.
8. Lyle, N. R., (2009), "Comprehensive Design Charts for the Footing on Slope Problem", University of Southern Queensland Faculty of Engineering and Surveying, Courses ENG4111 and ENG4112 Research Project.
9. Stormont, J.C., Anderson, C.E., 1999. Capillary barrier effect from underlying coarser soil layer. Journal of Geotechnical and Geo-environmental Engineering, ASCE, 125 (8), 641–648.
10. Travis, Q.B., Houston, S.L., Marinho, F.A.M., Schmeeckle, M., 2010. Unsaturated infinite slope stability considering surface flux. Journal of Geotechnical and Geo-environmental Engineering, ASCE, Vol. 136, No. 7, pp. 963–974.
11. Zou, Z.Y., Young, M.H., Wierenga, P.J., (2001), "Estimation of depth averaged unsaturated soil hydraulic properties from infiltration experiments", Journal of Hydrology, Vol. 242, No. (1–2), pp. 26–42.
التنزيلات
منشور
كيفية الاقتباس
إصدار
القسم
الرخصة
بيان الحقوق الفكرية
حقوق التأليف
يوافق المؤلفون الذين ينشرون في هذه المجلة على المصطلحات التالية:
١. يحتفظ المؤلفون بحقوق الطبع والنشر ومنح حق المجلة في النشر الأول مع العمل المرخص له في نفس الوقت بموجب ترخيص المشاع الإبداعي [سيسي بي-نك-ند 4.0] الذي يسمح للآخرين بمشاركة العمل مع الإقرار بحقوق التأليف والنشر الأولي في هذه المجلة.
٢. يمكن للمؤلفين الدخول في ترتيبات تعاقدية إضافية منفصلة للتوزيع غير الحصري للنسخة المنشورة من المجلة من العمل (على سبيل المثال، نشرها في مستودع مؤسسي أو نشرها في كتاب) مع الإقرار بنسخة أولية نشر في هذه المجلة.
٣. يسمح للمؤلفين وتشجيعهم على نشر عملهم عبر الإنترنت (على سبيل المثال، في المستودعات المؤسسية أو على موقعهم على الويب) قبل وأثناء عملية التقديم، حيث يمكن أن يؤدي إلى التبادلات الإنتاجية، فضلا عن الاستشهاد المبكر والأكبر للعمل المنشورة ( انظر تأثير النفاذ المفتوح).
نقل حقوق الطبع والنشر
بيان الخصوصية
المجلة الأكاديمية لجامعة نوروز ملتزمة بحماية خصوصية مستخدمي موقع المجلة هذا. سيتم استخدام الأسماء والتفاصيل الشخصية وعناوين البريد الإلكتروني التي تم إدخالها في هذا الموقع الإلكتروني فقط للأغراض المعلنة لهذه المجلة ولن يتم إتاحتها لأطراف ثالثة بدون إذن المستخدم أو الإجراءات القانونية الواجبة. موافقة المستخدمين مطلوبة لتلقي الاتصالات من المجلة الأكاديمية لجامعة نوروز للأغراض المعلنة للمجلة. ويمكن توجيه الاستفسارات المتعلقة بالخصوص إلى [email protected]